If you’re one of the unlucky ones whose AirPod isn’t charging, don’t worry; you can try a few things to get it working again. First, ensure that the Lightning connector is free of debris and dust. If that doesn’t work, try resetting your AirPods. If resetting doesn’t work, you may need to replace your AirPods battery.
While it’s an annoying problem, there are a few things you can do to fix it. In this article, we’ll go over some of the most common causes of this problem and what you can do to fix them.
How to fix AirPod charging issues?
Whether it’s because you’re out of battery or you’re having charging issues, it’s always a pain. But don’t worry, we’re here to help.
Charge the AirPods:
If your AirPods are not charging, there are a few things you can do to fix the issue. First, ensure the Lightning cable is firmly plugged into the charging case. If it is, try resetting your AirPods by holding the setup button on the back of the case for at least 15 seconds. If that doesn’t work, you may need to replace the Lightning cable. If you’re still having issues, contact Apple Support.
There are a few things you can do to fix the problem. Check for updates to your iPhone, iPad, or iPod touch software, and make sure that your AirPods are clean. If you’re using an iPhone or iPod touch with iOS 12.2 or later, you can check the Battery Health feature to see if your battery needs to be serviced.
Remove AirPod accessories:
If you own a pair of Apple’s popular wireless headphones, the AirPods, you may wonder how to remove the accessories that come with them. The ear tips, for example, can become worn out or lost over time. In this article, we’ll show you how to fix that problem in just a few steps.
If you have an AirPod and you want to remove the accessories that come with it, there are a few things that you need to do.
- First, you need to find the right tools.
- Second, you must know how to remove the accessories without damaging them.
- Third, you need to have patience.
- Fourth, you should have a clean work area.
- Fifth, having someone to help you with this task is helpful.
Check the cable:
If you’re one of the many people unlucky enough to have their airpod cable break, there’s no need to despair. There are a few easy ways to fix it.
You can easily fix your airpod cable with a little time and patience. All you need is a sharp knife, some duct tape, and a bit of wire.
First, use the knife to carefully cut through the duct tape holding the two pieces of the airpod together. Be careful not to cut yourself!
Next, take the two pieces of wire and twist them together. Make sure they’re tightly twisted, so they don’t come undone.
Finally, use duct tape to secure the wire in place. That’s it! Your airpod is now as good as new.
Check the charging ports and contact points:
If your electronic device isn’t holding a charge, it could be because of the charging port. Over time, the charging port can become clogged with dust or lint. This can prevent the device from charging properly. To clean the dock, use aQ-tip or toothpick to remove any debris. You can also try using compressed air to blow out the port. If that doesn’t work, check the contact points. The contact points are the small metal pieces that connect the charging cord to your device. Please make sure they are clean and free of debris. You can use a cotton swab or toothpick to clean them.
Clean yours AirPods:
If your AirPods look a little grubby, don’t worry, they can be easily cleaned! Here are a few simple tips to get them looking like new again:
- Start using a soft, lint-free cloth to wipe down the earbuds and the charging case. If you need to, you can also use a slightly dampened cloth.
- Use a dry toothbrush or Q-tip to clean the microphone and speaker grilles. Gently brush away any debris that’s accumulated.
- If your AirPods are still not looking clean, try using a cotton swab dipped in isopropyl alcohol. Be sure to only use this on the hard plastic areas of the earbuds and not on the speakers or microphones.
How to clean the AirPods?
Apple’s AirPods have become increasingly popular recently, but they can be tricky to keep clean. Here are some tips on cleaning your AirPods and keeping them looking new.
To start, it’s important to note that the AirPods themselves are waterproof and don’t need to be cleaned often. However, the charging case can get dirty and should be cleaned regularly. The best way to clean the issue is with a soft, dry cloth. To remove stubborn dirt or grime, use a mild soap or detergent diluted with water.
Be sure to avoid getting any moisture inside the charging case, as this could damage the AirPods. Once you’ve cleaned the case outside, dry it off completely before putting the AirPods back inside.
Reset the AirPods
If your AirPods are acting up, don’t panic. There are a few things you can do to try and fix them.
First, make sure that they are charged. If they are low on battery, that can cause all sorts of problems. Once they’re set, see if that fixes the issue.
If not, try resetting them. To do this, put your AirPods in their case and hold down the setup button on the back for about 15 seconds. This will delete all of the stored data and hopefully fix the problem.
Finally, if you need something else to work, you may need to take them to an Apple Store or authorized service provider to have them looked at.
Update Your AirPods Firmware:
If you own a pair of Apple’s popular wireless headphones, it’s important to keep their firmware up to date. Doing so can improve sound quality, battery life, and connectivity. Here’s how to make sure your AirPods are running the latest version of their software.
To check the current firmware version of your AirPods, open the case next to your iPhone. The version number will be displayed under the name of your AirPods on the connected device screen. If an update is available, you’ll see a notification that says, “Update needed.” Tap on it, then select Update when prompted.
Remember that you may need at least 50% battery life to install an update. So if your AirPods are running low on juice, plug them in before proceeding.
Conclusion
If you are having issues with one of your AirPods not charging, there are a few things you can try to do to fix the problem. First, ensure that both AirPods are in their case and that the issue is charged. If that doesn’t work, try resetting your AirPods. And if all else fails, contact Apple support for further assistance.
FAQs
Why is only one of my AirPods not charging?
It could be that the battery in that one AirPod is dead and needs to be replaced. It could also be that something is blocking the charging port on that one AirPod, preventing it from being charged.
Why is only one AirPod working, but both are charged?
Press and hold the setup button on the back of the case for about 15 seconds until you see the status light flashing white. Put your AirPods back in your ears.
Read more…
